Mankalp Industries

Additional Information:

• Item Code: MKP-208

Additional Information:

• Item Code: MKP-210

• Ammonia Gas Cylinder: 375 MM. DIA. X 1000 LENGTH.
• Size: 58” L X 15” W X 12” Ht. (Deep) Of Toe.
• Capacity: To Lift & Shift Purpose Of 1 No. 275 mm. Dia. X 1300 mm. Ht. Amonia Cylinder In It.
• Structure: Will Be Made From ¾” Dia. M.S. Pipe, 32 x 5 , 50 x 10 mm. M.S. Flat & 10 swg. M.S. Sheet.
• Handle: 2 Nos. M.S. Pipe Pulling-Pushing Handle Will Be Provided.
• Wheels: 2 Nos. 8” X 2” Size H.D.P.E.. Wheels With Double Ball Bearings Running On 1 No. M.S. Axle & 1 no. 6” x 2” Size Swivell Castor Wheel At Rear Side.

Additional Information:

• Item Code: MKP-214

• Size: 30” L X 18” W X 12” H.
• Structure: Will Be Made From 75 X 40 Mm. M.S. ‘C’ Channel With 35x35x5 Mm. M.S. Angle, 30x 5 Mm. M.S. Flat, 1” Dia. M.S. Pipe & 16 Swg M.S. Sheet.
• Wheels: 3 Nos. 8” X 2” Size H.D.P.E. Wheels With 2 Nos. 6205 ‘Z’ Type Double Ball Bearings In Each Wheel. 1 No. Swivell Castor At Front Side & 2 Nos. Fixed Mounted Castor At Rear Side.
• Handle: 1 No. ¾” Dia. M.S. Pipe Handle For Push-Pull Purpose.
• Paint: One Coat Of Primer & Two Coats Of Syn. Enamel Paint.

Additional Information:

• Item Code: MKP-216

• Wheels: 4 Nos. 16” X 4” Size pneumatic scooter Tyre Wheels With 2 Nos. 6205’z’ Double Ball Bearings In Each Wheel. 2 Nos. Wheels Mounted On Heavy-Duty M.S. Turn Table Device At Handle Side & 2 Nos. Wheels Mounted On Fixed Castor At Rear Side.
• Handle: 1 No. ‘T’ Shape M.S. Pipe Pulling Handle.
• Paint: One Coat Of Primer & Two Coats Of Auto-Finish Paint.

Additional Information:

• Item Code: MKP-201

Additional Information:

• Item Code: MKP-203

• Structure: Will Be Made From 75 X 40 Mm. M.S. ‘C’ Channel With 35x35x5 Mm. M.S. Angle, 30x 5 Mm. M.S. Flat, 1” Dia. M.S. Pipe & 16 Swg M.S. Sheet.
• Wheels: 3 Nos. 8” X 2” Size H.D.P.E. Wheels With 2 Nos. 6205 ‘Z’ Type Double Ball Bearings In Each Wheel. 1 No. Swivell Castor At Front Side & 2 Nos. Fixed Mounted Castor At Rear Side.
• Handle: 1 No. ¾” Dia. M.S. Pipe Handle For Push-Pull Purpose.
• Aint: One Coat Of Primer & Two Coats Of Syn. Enamel Paint.

Additional Information:

• Item Code: MKP-206

Additional Information:

• Item Code: MKP-207

Additional Information:

• Item Code: MKP-209

• Capacity: 6 Cu. Ft.
• Size: 36” L X 24” W X 12” Ht.
• Structure: Will Be Made From 75 X 40 Mm. M.S. ‘C’ Channel With 35x35x5 Mm. M.S. Angle, 30x 5 Mm. M.S. Flat, 1” Dia. M.S. Pipe & 16 Swg M.S. Sheet.
• Wheels: 2 Nos. 20” Dia. M.S. ‘T’ Section Wheels With Bearings

Additional Information:

• Item Code: MKP-211

Additional Information:

• Item Code: MKP-212